Njoy UPAC-TEMPHUM-AZ01B, User Manual

8

9

Step 2:

 SNMPmanagerwillbeautomatically

activated.Select“SNMPmanager”by

clickingrightbuttonofthemouse.

Step 3:

 EnterspecificIPaddresstosearchallSNMPdevicesinLAN.

TheSNMPmanagerwillautomaticallycollecttheIPaddress

fromseverbydefaultviaaDHCPserver.

Step 4:

 AfterSNMPmanagerissuccessfully

detectedbySNMPmanager,select

“OpenMonitor”byclickingrightbut

-

tonofthemouse.

Step 5:

 WhenlaunchingViewPowerProsoftware,click“Environmental

information”icontoviewstatus.

Troubleshooting

7

Problem

Possible Cause

Solutions

It displays 0 in the 

environmental in-

formation section 

of software.

SNMP card is not con

-

nected well.

Make sure SNMP card is 

firmly connected in the 

UPS.

Network cable or DC 

input connection is not 

connected well.

Make sure network cable 

is connected well and DC 

input connection is well.

LED is not lighting 

or LED is flashing.

Input power is not stable.

Check if DC input is 

connected firmly. If the 

problem persists, please 

contact local dealer.

Temperature or 

humidity accuracy 

is out of range.

Temperature or humidity 

sensor is broken.

Please contact local deal-

er directly.