4
2.
Connect front panel / LCD cables
a) Connect Front USB 2.0, IEEE 1394 and Audio Connectors
b) Connect PWR Switch
c) Connect RESET Switch
d) Connect front AV capture port cable
e) Connect LCD cables
See below table for more details
Connectors
(Picture for reference only)
Step 1: Connect Front USB 2.0, IEEE 1394 and Audio Connectors
See motherboard user manual for location and connection.
USB Port Color Codes
:
Red = +5V
White = Data- (-D)
Green = Data+ (+D)
Black = Ground (GND)
IEEE 1394 Color Codes
Black -- Ground (GND)
Red -- +5V
Blue -- +TPB (TPB+)
White -- -TPB (TPB-)
Yellow -- +TPA (TPA+)
Green -- -TPA (TPA-)
Audio Interface
Pin 1 (MIC IN) Red
Pin 2 (MIC GND) Black
Pin 5 & 6 (SR)
Pin 7 (Empty) White
Pin 8 & 9 (SL)
(AC97 Codec Header)
Connect front Power switch connectors
PWR SW
See motherboard user guide for connection
Install AV Capture Module
o
Use the thick extension cable to connect the 10 pins header
of the A/V capture module (label face-up)
o
Route the extension cable to the back of the case via the
S/PDIF PCI slot hole
o
Secure the cable with the cable lock
o
Connect the Audio/Video headers to the TV tuner capture
card accordingly
If you are using a MCE compatible TV tuner card that comes with
an onboard 10 pin capture port (white connector), use the
equipped AV internal capture cable to connect the front AV
capturing module to the onboard connector directly.