4
Organize the cables with provided cable ties.
See picture for reference.
Step 5: Other Component Installation
For other components, including hard drive connection; RAM; CPU & cooler; optical drive, operating
system, video card, sound card, TV tuner card and power supply connection etc., follow the user
manuals and motherboard manual instruction.
LCD Module Set Up
CPU Temperature Reading
Use tape to secure sensor header around the heatsink or CPU area to detect CPU temperature appropriately.
CPU Cooler Fan Speed Reading
Connect the CPU cooler fan to the LCD “CPU FAN” connector, and then connect the extension cable to the motherboard Fan
Header. In this set up, CPU fan speed can be controlled by the motherboard utility software and the fan speed can be read in the
LCD. Otherwise, the speed is automatically controlled by the LCD base on the CPU temp. See below chart for more details.
S-0
S-1
S-2
< 30C
86F
~65%
30C/86F-
50C/122F
~80%
>50C
122F
~95%
CPU Alarm Temperature
When CPU temperature hits 60
º
C or 140F, the temperature reading will flash constantly until the temperature drops below
the alarm degree.
CPU Fan Alarm
When the fan stops running for whatever reason during working mode, the CPU fan speed reading will flash
constantly in “0000” until the fan is re-spinning again.
Reference
http://www.nmediapc.com
Technical Support Email:
support@nmediapc.com
Safety Instructions
z
Always read the step by step installation instruction to protect your components
z
Keep the user guide for future reference
z
Keep away from humidity, liquid and temperature above 60c (140 f) environment
z
Make sure the voltage of the power supply and adjust properly 110/230V
z
Always unplug the power cord before inserting any add-on devices
Get the system checked by service personnel if below happens:
z
The power cable is damage
z
Liquid has penetrated into the system
z
Dropped and damaged
RMA Return Policy
z
All accessories and cables must be returned as they were shipped
z
Carefully re-packaging is needed to avoid shipping damages
z
All warranties are subject to properly uses. Any human power damages return may be rejected
according to warranty terms and conditions
Copyright © 2004-2008 NMEDIA SYSTEM, INC. All Right Reserved!
