B7 series lighting board
assembly guide
Version
0.0.3
Page 9 of 14
Insert the wires of the current pickups to the previously drilled holes
and lead them to the interior of the carriage. Assembly the boogie
and the 2 springs to the carriage body.
Insert the two washers contained in the package over the screw
before fixing the boogie. Depending on the screw size, the internal
diameter of the washers may need minor adjustments. This can be
done using a small file.
Using a small size screwdriver fasten the boogie to the carriage base.
The boogie should rotate freely around its central position due to the
two washers.
