www.stingerworld.com
MAINTANANCE & STORAGE
13
MAINTENANCE
1.
Disconnect the air hose from the tool when performing inspections, maintenance or repairs.
2.
Use air line lubricators. If lubricators are not available, or if hose length exceeds 10 feet, add
2 drops of non-detergent 20-weight oil daily into the air inlet of the tool.
3.
Whenever repairs or replacement of parts inside the body occur, check the piston “O” ring for
adequate grease lubrication.
4.
Never use any parts other than genuine
STINGER
replacement parts. To order, call
800-746-5659.
5.
Periodically clean the Magazine and Nose of the tool with a mild solvent.
STORAGE
1.
Disconnect the air hose when storing the tool.
2.
Never store the tool in cold weather environments for any duration of time as any frost or ice
formation in the tool will cause tool failures.
3.
For prolonged storage, add 2 drops of oil to the air inlet of the tool prior to discontinuing use.
Also clean the exterior of the tool with a mild solvent.
