www.stingerworld.com
IMPORTANT INFORMATION
AIR SUPPLY AND CONNECTIONS
•
Use only clean, regulated compressed air as a power source for this tool. Do not use bottle
gases, combustible gases or oxygen as a power source for the tool as the tool may explode.
•
Do not use air supply pressures that exceed
105 PSI
. Exceeding the recommended maximum
operating air pressure will greatly increase tool wear.
•
The air supply must be capable of maintaining the operating air pressure of the tool. Pressure
drops in the air supply can reduce the tool’s driving power.
•
Use a pressure regulator and gauge to allow visual inspection of the air pressure being
delivered to the tool.
•
Use air hoses that have rated pressures of up to 150% of the maximum pressure that can be
generated by the power source. The supply hose should contain fittings that will provide quick
disconnecting from the male plug on the tool.
•
Use quick connect fittings that allow the tool to be unhooked from the air supply quickly and
easily.
•
Do not use fittings that will not allow the tool to exhaust when the air supply is disconnected.
3
