background image

7

GB

Initial opening and emergency 
opening 

When you want to open the safety deposit 
box for the fi rst time, fi rst release the control 
panel (2) on the front on the door (7). Press 
the release button (5) and turn the control 
panel anticlockwise so that the keyhole 
behind the control panel is accessible. Insert 
one of the keys supplied into the keyhole 
and turn it a quarter turn anticlockwise. Turn 
the handle (6) clockwise and open the safety 
deposit box. Remove the key and replace the 
control panel.

WARNING! Do not leave the keys inside the 
safety deposit box! Safety deposit boxes 
are produced in batches at the factory, and 
therefore there is no way of replacing keys.

Inserting and replacing the battery

Once you have released the control panel, 
insert a 9 V battery to open the safety deposit 
box with a code. Replace the control panel.
WARNING! Take care not to damage the 
safety deposit box’s wiring when changing 
the battery. 

After installing a new battery, the code must 
be reprogrammed.
When the battery is running low, the red and 
green indicator lights come on at the same 
time when you have entered the correct 
code. Ensure that the battery is replaced as 
soon as possible.

Opening the box using the code

1.  The standard code is set to 159# at the 

factory.

 

However, we recommend that you 
set your own personal code. See 
“Programming the code”.

 

Open the safety deposit box using the 
factory preset code by entering 1-5-9-#. 
The yellow indicator light fl ashes 3 times 
and 3 beeps will sound, after which the 
green indicator light will come on. If both 
the green and red indicator lights are lit, 
you must replace the battery as soon as 
possible.

 

Once the entered code has been 
approved, you have 5 seconds to turn the 
handle (6) clockwise and open the door 
(7) before it relocks automatically.

2.  If you enter an incorrect code, the red 

indicator light fl ashes 5 times and 5 
beeps are heard. If you enter the wrong 
code 3 times, the keypad is blocked for 
20 seconds. If you enter the wrong code 
3 more times, the keypad is blocked for 5 
minutes.

3.  Close the door and turn the handle as 

far as possible anticlockwise to lock the 
safety deposit box again. The door may 
be closed no earlier than 6 seconds after 
the code has been entered.

Summary of Contents for 57114










Reviews: