background image

Always charge the battery inside a LiPo Safe Charging Bag.

Remove battery from charge as soon as charging is complete.

Always charge on a fire retardant surface.

Never charge for more than 4 hours.

Never leave to charge overnight.

Do not keep in a pocket, handbag or similar with loose change or keys.

No-Match can not be held responsible for any damage caused by misuse, 

mishandling or any damage caused by not using the LiPo Safe Charging Bag.

cut off the power immediately, discontinue use and contact your supplier for 

further help.

As this device has an internal lithium battery the lifespan will be limited.

Do not pierce the battery in any way.

Do not drop, strike or subject a battery to strong impact or shock.

Do not attempt to modify or dismantle the battery in any way.

Do not use the battery if there is any sign of damage.

Do not overtighten the battery to the atomiser.

Do not use a charger with frayed or damaged wires.

12

Whilst not in use, please put the device where children can’t reach. This device 

is not intended to treat, mitigate, prevent or cure any disease or condition and 

is not for use as a smoking cessation device.

Only for use with a No-Match Charger. Use of unauthorised chargers may lead 

to overheating and possible burning. No-Match is not responsible for battery 

and charger explosions, fires or malfunctions due to the use of low quality 

chargers.  This product does not come with a wall charger included. (available 

from No-Match separately) Please do not use with a car charger, or adapter.

Do not leave the battery depleted for a long time otherwise the battery 

capacity may be decreased.

Do not leave this device unattended whilst charging.

If the device is found to be excessively hot when charging or in use, you should 

11

On first use, or after replacing the coil, please keep the tank standing for at least 

2 minutes after filling with e-liquid. This will let the coil soak up the liquid. 

Failure to do this can burn the coil out quicker, and/or produce a burning taste.

Keep the charger and battery away from fire and high temperature at all times.

Only use a No-Match Mains-USB charger or a suitable computer USB port to 

charge.

Never expose a battery to water.

If liquid leaks from the atomiser you should wash you hands immediately and 

do not touch eyes.

Indicating lights: 

Blue, Red & Purple

Battery type: 

Built in 18650 battery - more than 20A discharge.

Charging instructions: 

Charge inside LiPo Charging Bag and use a 

No-Match Mains-USB 5V 1A charger (not supplied) or a suitable computer USB 
port.

Size: 

32 * 23 * 130 mm

Charging Time:

 Up to 4 hours (DO NOT CHARGE FOR MORE THAN 4 HOURS)

Tank/Atomiser

Resistance: 

0.6Ω, 1.0Ω ( spare included coil ) (0.3Ω available separately)

Capacity: 

<2.0ml

Construction: 

100% USA made Kanthal wire, 304 stainless steel + 

Borosilicate glass, 100% Organic Cotton.

Battery

Output power: 

50W Max

Supported coil resistance range: 

0.3Ω ~ 3.0Ω (Please note some 

atomisers may require more power even if they fall within this range.
Please check your manufacturers instructions)

output.

Low voltage:  

If the voltage gets lower than 3.3v the red light will flash 15 

times and will automatcially cut off the power output.

Over-charging protection:  

When the battery voltage reaches 4.25v the 

device will stop charging.

Charging indication:  

Connect the ATOM battery to a No-Match 5V 1A 

charger or a suitable computer USB port and the power status will show:
Red light - The voltage is less than 3.5v
Purple light - The voltage is between 3.5v & 3.8v
Blue light - Voltage is over 3.8v
All lights off - Fully charged (or not connected to charger)

Operating Instructions

On/Off:  

Press the vaping button 5 times within 2 seconds to turn on/off 

device. The indication light will flash 3 times.  The light will illuminate blue 

(voltage ≥3.8v), Purple (Voltage 3.5v - 3.8v) or red (Voltage <3.5v)

Vaping: 

Press the vaping button and vape. Whilst vaping, the indication light 

will illuminate. The light will illuminate blue (voltage ≥3.8v), Purple (Voltage 

3.5v - 3.8v) or red (Voltage <3.5v)  Release the button and the indicator lights 

will turn off.

Short circuit protection: 

If a short circuit occurs, when you press the 

vaping button the blue/purple/red lights will alternately flash 3 times in 

sequence. 

Vaping time protection: 

If the vaping button is pressed for longer than 10 

seconds the red light will flash 8 times and will automatically cut off the power 

Summary of Contents for Atom










Reviews: