NOA Vision N55LUSB Software Update Manual Download

Page: 6 / 9

English Update Guide

Step 1.

Check the model name on the back side of the TV.

Step 2.

Download the latest software from the official

NOA Vision Product Webpage

1.A)

Check the back panel

Before downloading the software upgrade please check the back side of the TV for the
model Name.
Model name must be N55LUSB.

Product page: https://www.noa-mobile.hr/vision/n55lusb

If the model name is not N55LUSB,
please do not download and use this software to upgrade your NOA Vision TV.

We do not take any responsibility and we are not liable for any damage caused by
upgrading TV device with the wrong software version.

1.B)

Find the model name selected with orange label in the illustration:

Summary of Contents for Vision N55LUSB

Page 1: ...N55LUSB TV Software Update Guide Vodič za ažuriranje TV softvera ...

Page 4: ... mehaničkom prekidaču postavite prekidač na 0 Prekidač se nalazi na donjoj desnoj strani TV a 8 Korak Uključite TV na mehaničkom prekidaču postavite prekidač na 1 Prekidač se nalazi na donjoj desnoj strani TV a 7 Korak Umetnite USB memoriju u USB priključak na TV u USB priključci se nalaze na lijevoj strani TV a Možete koristiti bilo koja dva USB priključka USB1 ili USB2 ...

Page 8: ...hysical power switch set switch to 0 Switch can be located on the Bottom Right of the TV Step 8 Turn on the TV on physical power switch set switch to 1 Switch can be located on the Bottom Right of the TV Step 7 Insert USB drive into USB port of the TV USB ports are located on the Left side of the TV You can use any of the two USB ports USB1 or USB2 ...

Page 9: ...several minutes for update to ﬁnish After successful update TV will turn OFF by itself Step 10 After successful update TV device will be turned off automatically Before turning the TV on please remove the USB Flash Drive from the USB Port of the TV Turn on the TV by pressing the POWER button on the Remote Controller Your TV should be updated to the latest version ...