NOA Vision N55LUSB Software Update Manual Download

Page: 8 / 9

Step 5.

Copy your extracted 6586_DVBT_8G.bin to root of

FAT32 formatted USB flash drive

Step 6.

Plug the TV into power outlet,

and turn off the TV on physical power switch

(set switch to 0)

- Switch can be located on the Bottom Right of the TV

Step 8.

Turn on the TV on physical power switch

(set switch to 1)

- Switch can be located on the Bottom Right of the TV

Step 7.

Insert USB drive into USB port of the TV

- USB ports are located on the Left side of the TV
- You can use any of the two USB ports (USB1 or USB2)

Summary of Contents for Vision N55LUSB

Page 1: ...N55LUSB TV Software Update Guide Vodič za ažuriranje TV softvera ...

Page 4: ... mehaničkom prekidaču postavite prekidač na 0 Prekidač se nalazi na donjoj desnoj strani TV a 8 Korak Uključite TV na mehaničkom prekidaču postavite prekidač na 1 Prekidač se nalazi na donjoj desnoj strani TV a 7 Korak Umetnite USB memoriju u USB priključak na TV u USB priključci se nalaze na lijevoj strani TV a Možete koristiti bilo koja dva USB priključka USB1 ili USB2 ...

Page 8: ...hysical power switch set switch to 0 Switch can be located on the Bottom Right of the TV Step 8 Turn on the TV on physical power switch set switch to 1 Switch can be located on the Bottom Right of the TV Step 7 Insert USB drive into USB port of the TV USB ports are located on the Left side of the TV You can use any of the two USB ports USB1 or USB2 ...

Page 9: ...several minutes for update to ﬁnish After successful update TV will turn OFF by itself Step 10 After successful update TV device will be turned off automatically Before turning the TV on please remove the USB Flash Drive from the USB Port of the TV Turn on the TV by pressing the POWER button on the Remote Controller Your TV should be updated to the latest version ...