43
/
50
55
65
中性英文说明书(欧洲 9632方案 T8E)(
a
pple
UI,
同轴,三芯)
(
电子)
V1
.
1
FU 43D2U/ FU
/
FU
/
FU
5
Panel Control Keys
Precautions for using the remote control
●
The remote control should be pointed at the remote
control sensor during operation. An object placed
between the remote control and the remote control
sensor may impede normal operation.
●
The remote control should be prevented from
strenuous vibration. Besides, please do not set or
place the remote control under direct sunshine, as
heating power may result in deformation of the
remote control.
●
Remote control failure may occur when the remote
control sensor of the main unit is under direct
sunshine or strong lighting; in this case, please
change the angle of lighting or this TV set, or
operate the remote control near the remote control
sensor.
●
Low battery will influence the remote control
distance, in which case, the battery should be
replaced with a new one. If the remote control is
going to be idle for a long time or the battery runs
out, please take the battery out to prevent the
remote control from being corroded by battery
leakage which may result in damage and failure of
the remote control.
●
Please do not use batteries of different types. It is
not allowed to use old and new batteries together;
the batteries should be replaced in pair.
Remote Control
1
Up
Right
Left
Down
2
1. Power LED indicator and remote receiving window.
2. Rocker button combination key:
Power on or standby with
OK
rocker
:
①
. When Plugged power cord into the electrical
socket, you can press
OK
rocker to turn on the
TV.
②
. In power on state, long press
OK
rocker 2
seconds to display the function menu, then
move rocker Left/Right to select and press
OK
rocker to switch to standby mode.
After turn on the TV, Press
OK
Rocker:
①
.
In non-OSD menu operation, long press
OK
rocker 2 seconds to
display the function menu
which includes 9 sorts. During the menu
operation, press
OK
rocker to
confirm the
operation and the function is the same as [
OK
]
key on the remote control.
②
.
In
non
-
OSD
menu
operation,
press
OK
key
to
display
input
source
and
the
function
is
the
same
as
[
SOURCE
]
key
on
the
remote
control
.
Move rocker
Left/Right
:
①
. In non-OSD menu operation, move rocker
Left
/
Right
to decrease/increase the volume, the
function is the same as [
]/[
] key on the
remote control.
②
. In OSD menu operation, move rocker
Left
/
Right
to adjust the analog value of selected item, the
function is the same as [
t
]/[
u
] key on the
remote control.
Move rocker
Up/Down
:
①
.
In non-OSD menu operation, move rocker
Up
/
Down
to
select the channel, the function is
the same as [
P
]/[
P
] key on the remote
control.
②
. In OSD menu operation, move rocker
Up
/
Down
to select the adjustment items, the function is
the same as [
▲
]/[
▼
] key on the remote control
.
Remark
:
①
. The appearance varies depending on the model,
and the actual product shall prevail.
②
. In smart mode, please operate with the remote
control.
