Noark Ex9M Series Manual Download | Manualshive

Page: 27 / 55

background image

53

52

Accessories

Connection accessories

Cable connectors (MC)

Ex9M series circuit breakers are available with various accessories including: front connection plate
(JP), cable connector (MC), rear connection plate (RCP), plug-in base (PIA), draw-out base (DOB),
and DIN rails. There accessories provide flexible connection methods for Ex9M series circuit breakers

and ensure circuit safety no matter which type of connection method is used.

Rear connection plate (RCP)

Front connection plate (JP)

The rear connection plate is used for wiring at the back of mounting board so as to cooperate
with distribution board or satisfy other needs.

See Dimension and Installation chapter for wiring dimensions.

It provides a flexible connection method to the circuit breaker. By using this accessory, user can
extend the distance between poles so as to increase the electrical clearance between adjacent
poles at both incoming and outgoing end and improving the safety between lines.

Product name and

figure

Wiring capacity

(mm

2

)

Hole number on

the connector

Ex9M1

Ex9M2

Ex9M3

Ex9M4/

Ex9M5

Ex9M6

Cable

connectors

2.5~75

1 built-in

steel hole

MC21

10~120

MC22

120~240

1 built-in

aluminum hole

MC23

16~95

1 external

aluminum hole

MC21 W

35~240

MC22 W

2× (35~120)

2 external

aluminum holes

MC22 W2

2× (120~240)

MC23 W2

2×240

MC24 W2

3×95

3 external

aluminum holes

MC26 W3

(800A)

4×95

4 external

aluminum holes

MC23 W4

MC26 W4

(1000A

/1250A)

6× (10~35)

6 external

aluminum holes

MC22 W6

Closing electromagnet (XF)

The closing electromagnet is used to close the circuit breaker remotely. When the circuit breaker is

under disconnect or energy storage status, user can use the closing electromagnet to close the circuit

breaker at any time. The closing electromagnet can be controlled by either AC or DC. When the

power supply voltage is within 85%-110% of the rated control power supply voltage, user can use the

closing electromagnet to close the circuit breaker. This is a short time approach, with power-on time
from 0.2s-2s, long time power-on can burn out the circuit breaker.

Electrical characteristics

Rated operating voltage U

e

(V)

AC48/110 /220-260/380-415

DC24/48/110-120/220

Voltage range

85-110%

Pulse duration (s)

0.2~2

Power consumption

AC

5VA

DC

5W

Circuit breaker making time (ms)

<70

Circuit breaker breaking time (ms)

50±10

Rated insulation voltage (kV)

2

Peak current

6XIn

Accessories

Plug-in base (PIA)

DIN-rail adapter

Key parameters of front connection

Front connection: use screws (bolts) for direct connection with busbar, copper or aluminum terminal

lug.

Ex9M1 and Ex9M2 fixed type circuit breakers are mounted on 35mm DIN standard rails, in which

case a DRA rail adapter is needed.

35mm DIN standard rail

Simplified

withdrawable chassis

Standard withdrawable

chassis

L

D

Φ

DRA Din-rail adapter

(only applicable to 3P/4P)

Frame size

Ex9M1

Ex9M2

Ex9M3

Ex9M4

Ex9M5

Ex9M6

Polar distance (mm)

30

35

45

45

65

45

Connecting screw

size

M6

M8

M10

M10

M12

M10

L

≤20

≤25

≤30

≤30

≤50

≤55

D

≤4

≤6

≤8

≤10

≤15

≤20

Φ

>6

>8

>10

>10

>12

>10

Note:

Ex9M6 uses two groups of bolts for connection.

35

Draw-out base (DOB)

●

For fast replacement of circuit breaker, with no need to alter incoming and outgoing
lines and mounting base.

●

User can pre-install the draw-out base for easy addition of extra circuit breakers in the

future.

●

The included safety device ensures the circuit breaker can trip automatically when it

is pulled out under ON status.

Circuit breakers combined with withdrawable chassis have the following two status:

●

Connection status: the power circuit is connected

●

Removable status: the circuit breaker can be removed from the chassis

●

For fast replacement of circuit breaker, with no need to alter incoming and outgoing lines and
mounting base.

●

User can pre-install the plug-in base for easy addition of extra circuit breakers in the future.

●

It can isolate the power circuit if the circuit breaker is thread mounted or base mounted.

●

The included safety device ensures the circuit breaker can trip automatically when it is pulled out

under ON status.

Ex9M1-Ex9M6 front connection

parameters

«
...
25
26
27
28
29
...
»

Summary of Contents for Ex9M Series
























































Reviews:

No comments

Related manuals for Ex9M Series

Brand: Eaton Pages: 2

Brand: Eaton Pages: 60

Brand: Eaton Pages: 106

Cutler-Hammer Digitrip 1150

Brand: Eaton Pages: 84

Brand: Eaton Pages: 8

Brand: Eaton Pages: 68

Brand: GE Pages: 46

Brand: GE Pages: 44

Brand: KING Pages: 4

Brand: Toshiba Pages: 38

Brand: Toshiba Pages: 39

Brand: Toshiba Pages: 57

Brand: Toshiba Pages: 59

Brand: Toshiba Pages: 63

Brand: Coster Pages: 20

Brand: nader Pages: 33

Brand: IDEAL Pages: 54

Brand: ABB Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands