33
Ε) TCR mode (M1, M2, M3)
This mode allows you to manually change the Tempera-
ture Coefficient of Resistance (=T.C.R.) of the coil head
of your atomizer, depending on the type of wire it uses.
If you are not aware of the T.C.R. of the wire you intend
to use, please find out more information about the T.C.R
first and then proceed to any further action.
Three (3) different memories (M1, M2, M3) are support-
ed, each working independently for T.C.R. adjustment.
To adjust the T.C.R.:
While the device is powered off, press together the fire
and (+) buttons for about five (5) seconds.
The device enters the menu showing the following print
screen:
ΕΝ
By pressing the +,- buttons you cycle through M1, M2,
M3 memories and by pressing the fire button you can
enter the value of each memory.
