34
Input the correct T.C.R. value using the +,- buttons.
The range in each memory is 1-1000.
CAUTION:
Using different T.C.R. value than the one of the wire may
result in malfunction of the device and the atomizer.
Warranty is void due to misuse.
Note:
If the device detects atomizer with a resistance
bigger than 1.5 ohms, it automatically turns to POWER
mode for safety reasons.
Atomizer Lock:
While the device is powered on, attach the atomizer. Press
the fire button (3) consecutive times and then the (-) but-
ton until the resistance indication starts to blink. Press the
(+) button one time to lock/unlock the resistance value.
Atomizer lock is advised for the correct function of the de-
vice in Temp Modes (TEMP Ni-Ti-SS316/TCR Mode).Each
time you use a new atomizer or a new coil head atomizer
lock procedure should be followed for top performance.
Note:
Device and atomizer must be in room tempera-
ture in order for the atomizer lock procedure to be done
correctly. In any other case indications of temperature
and resistance may differ from the actual resulting in
poor performance.
Product manual