35
Your device can auto detect the value of the atomizer’s re-
sistance. If it detects a difference greater than 0.05 ohms,
while in Temp Modes, the device prompts you to choose if
there is a new coil attached with following message:
Choose new coil by pressing the (+) button, if you are
using a different coil/atomizer than the one before the
message appeared or same coil by pressing (-) if it is the
same coil/atomizer.
AMP/PUFF/TIME
Your device allows you to have three (3) different indica-
tions at the bottom line of the screen.
ΑMP: Amperes used while vaping
PUFF*: Puff counter
ΤΙΜΕ*: Device usage in seconds
To choose your preferred reading: Press three (3) con-
secutive times the fire button and then the (-) button
ΕΝ