28
Putting into service
TB 151/181/211
Shredders
Rubber flaps
The hood is fitted with rubber segments to prevent the
ejection of stones or other objects.
Immediately replace any worn or damaged segments:
• Remove the mounting bolts 1.
• Remove mounting bar (2).
• Replace segments.
• Clean and reassemble the unit. Tightening torque:
8 daN m (59 lbf ft).
Uncoupling the machine
- Place the machine in horizontal and central working
position behind the tractor.
- Lock hitch frame using lock pin.
- Lower and lock parking stands (1).
- Lower the tractor three-point linkage to rest the
machine on the ground.
- Uncouple the PTO shaft from the tractor.
- Put the PTO shaft into its support (2).
- Disconnect and store hydraulic hoses on holder (3).
- Detach the top link from the machine end.
- Uncouple the lower links.
- Lower the tractor three-point linkage.
The machine is uncoupled.
1
2
1
1
2
3
Summary of Contents for TB 151
