Shredders
10. - Maintenance and storage
73
TBE GBseries 102
JN070AGB B
10.5.2 At the start of each season
- Re-read the operators' manual.
- Check that the machine is greased.
- Check all the knives and fixings, and replace if
necessary.
- Check that all nuts and bolts are sufficiently
tightened.
- Retension V-belts.
- Check belt guard condition and if it is firmly
secured in place.
- Make sure all the guards are in place.
- Wipe off grease on cylinder rods.
10.6 Machine recycling
In case of recycling, the machine will have to be recycled
in conformity with the legislation in force in the country
concerned.
Prior to proceeding with the recycling, remove all plastic or
rubber parts, electric or electronic equipment.
Collect possible residual oil and give it to an appropriate
processing center.
Parts only made up of plastic, aluminium, steel can be
recycled if they are collected by an appropriate center.
