Nobis A11 C ZENITH, Installation, Use And Maintenance Manual

Use and Maintenance Manual model “A11V - C ZENITH & A11 V PLUS ZENITH”

21 

ENGLISH

ENGLISH

OPERATING PROCEDURE:

 MENU >> SET USER >> THERMOSTAT TIMER

Access the menu by pressing key
Scroll the items to SET USER, key  
Access the menu by pressing key
Scroll the items to THERMOSTAT TIMER, key  
Access the function with the key
The screen appears with activation of the 

function and the possibility of selecting 4 TIMED set-

ting programs, as in the figure.

OK

OK

OK

Edit the switch on and switch off times, as well as 

enabling the days of the week, keys  

Confirm each data change using the 

key       and pass to the second screen of the 

TIMER program. 

The screen, in the figure below, displays the possibili

-

ty of setting the power to the fireplace during 

activation of the time slot and the temperature you 

want to obtain in the ambient       .

Furthermore, you can manage the ventilation speed 

(if optional) you want to have at a given power      . 

OK

1

1

2

2

Edit the values using the keys  

Confirm each data change using the 

key      until you exit the program.

OK

During editing, remember that:

• to return to the previous data, without saving 

   the last data changed, press the key   

• 

if you intend changing a single datum, having ter

   minated the change, press the key       multiple 

   times until you exit the following function.
To return to the STAND-BY screen, use the 

key       , repeating the operation multiple times.

OK

11.2 AUGER LOADING FUNCTION

The following function is necessary to facilitate the 

switch on phase of the appliance, after accurate 

cleaning was conducted of the hopper (pellet con-

tainer) to remove sawdust which, over time, is creat-

ed on the base. See the chapter “Routine mainte-

nance of the product”.

Also check you have placed pellets in the tank and 

that the appliance is in the “OFF” or “FINAL CLEAN-

ING” status before starting the function.

The number expressed in seconds indicates the rota-

tion  time of the auger during the loading phase. 

After this time is up, the auger stops 

automatically, after which the appliance 

can switch on.

OPERATING PROCEDURE:

 MENU >> SET USER >> AUGER LOADING

Access the menu by pressing key
Scroll the items to SET USER with the key  
Access the menu by pressing key
Scroll the items to AUGER LOADING, key  
Access the function by pressing key    
The cleaner activates (for models with automatic 

cleaning), after which pellet loading is enabled. The 

display shows the time that passes up to 0, corre-

sponding to loading switch off.

OK

OK

OK

OK

The appliance, at the end of loading, goes to the 

SET USER screen.

Enable/disable the function with the key        to dis-

play the addition or bypassing of the tick and:

• Return to SET

USER with the key      .

OR

• Pass, using the key       , to the choice of 

   program to set, before accessing with the    

   key       to change it.
If you want to access 1 of the 4 programs, the 

screen presented is as follows: 

OK

OK

After the initial loading phase, a appears

POPUP which indicates to suck the pellet from the 

brazier. This operation does not allow emptying the 

pellets in the ash drawer when the plate is rotated 

during ignition.

Always vacuum the brazier using an ash cleaner, 

risk of fire.