Use and Maintenance Manual model “A13V - C ZENITH & A13 V PLUS ZENITH”
18
ENGLISH
The appearance is highlighted of the “flame” sym
-
bol with the writing ON, without displaying the work
power.
Prolonged pressing of the key accompanied by
acoustic signalling causes switching off of the prod-
uct, as well as resetting of any alarms.
For models with an automatic cleaner, during
the switch on phase, the product activates a brazier
cleaning phase before passing to SWITCH ON.
In the event of FAILED IGNITION, after pressing the
button, a POP UP signals the need to suck the pellet
from the brazier before turning the appliance back
on, thus avoiding discharge of unburned pellets into
the ash drawer.
10 THE WORKING PHASE
The products in the range include a working phase
with 7 operating power levels. The behaviour of the
appliance is described below once the setting, if set,
is reached of the ambient temperature.
10.1 SAVING MODE
During the work phase, the appliance works with the
objective of reaching the ambient temperature
set; when this condition is met, power is reduced to
SAVING mode, the phase in which fuel consumption
is minimal.
At this point, you must execute a series of precisions
to benefit the AUTO function, to pass to saving and/
or return to fully operational mode:
•
Ventilation, if present and enabled, works in
different operational modes based on the existing
discrepancy between the setting and the tempera-
ture in the premises.
• The appliance gradually increases the
power to the fireplace, as soon as the temperature
in the premises goes under the required
setting (optimisation of combustion and
acoustic comfort).
During first start-up of the product, unpleasant
odours may occur or smoke caused by evaporation
or drying of certain materials used. This phenomena
disappears after some hours of use. During this peri-
od, you are advised to keep the premises well ven-
tilated.
Screen in SAVING mode:
10.2 AIR CON. COMFORT FUNCTION
As described in the “saving mode” paragraph, the
appliance has the objective of meeting the comfort-
able heating requirements of the user. The function
which can be enabled, linked to his mode, also en-
sures, if the home has a good energy class, a fuel
saving through intelligent switch off of the product
(reaching or required of the desired setting).
The procedure follows to enable the
function, the change of values with relevant
meaning, a practical example of setting.
OPERATING PROCEDURE:
MENU >> SET USER >> AIR CON. COMFORT
Access the menu by pressing key
Scroll the items to SET USER with the key
Access the menu by pressing key
Scroll the items to AIR CON. COMFORT, key
On the AIR CON. COMFORT menu item, key
The screen appears with activation of the
function and adjustment of the setting parameters,
as in the figure.
OK
OK
OK
Enable/disable the function with the key to dis-
play the addition or bypassing of the tick and:
• Return to SET
USER with the key .
OR
• Pass, using the key , to the choice of
time in saving mode, before the function
switches off the product.
Edit the value with the keys
OK
Confirm the data with the key and go to
temperature setting, under which the product must
switch on.
OK
Always vacuum the brazier using an ash cleaner,
risk of fire.
