Use and maintenance manual model “UNICA 10 V/C” - WOOD
ENGLISH
4
1 INTRODUCTION
The product by Nobis was designed and
manufactured in compliance with the reference
standards for the manufacturing products
(EN13240 wood stoves, EN14785 pellet appliances,
EN13229 fireplaces/inserts for wood, EN12815 wood
stoves), with high quality materials. The products
also comply with the essential requirements of
the Directive 2014/35/EU (Low Voltage) and
the Directive 2014/30/EU (Electromagnetic
Compatibility).
The printing, translation and reproduction, even
partial, of this manual is intended as binding
by the manufacturer's authorisation and the
content of working logic and explanatory figures
is considered not be be disclosed.
Always consult the authorised technicians if in
doubt and/or confused by operation of the the
product.
The manufacturer reserves the right to make
changes to specifications and technical and/
or working features of the product at any time
without prior warning.
1.1 SYMBOLS
Nel The following manual contains symbols which
highlight the importance of particular descriptions
or concepts;
INFORMATION
: Compliance with the specifications
guarantees correct operation of the product.
ATTENTION
: Symbol used to identify particularly
important information
DANGER
: The presence of this symbol indicates
utmost attention is required, to guarantee user
and product safety.
1.2
INTENDED USE
The product in this manual, is a fireplace for
domestic heating, feed by automatic loading
and exclusively with wood pellets.
The product was designed and manufactured to
work in safety if the following conditions occur:
• installation by specialist staff according to the
specific reference standards;
• use within the limits declared on the product data
sheet and in this manual;
• compliance with technical procedures described
in the manual;
• carrying out routine maintenance within the times
and methods indicated in this manual;
• prompt execution of extraordinary maintenance
if necessary (malfunctioning);
• activity and maintenance of safety devices (do
not remove or bypass this devices).
1.3
IMPROPER USE
The product must be intended for the use for
which it was expressly designed; for any other use,
the manufacturer cannot
be held in any way liable for damage caused to
people, animals or property.
Improper use is intended as:
• use of the product as an incinerator;
• use of the product with fuel other than wood
pellets with a diameter of 6 mm;
• use of the product with liquid fuel;
•
use of the product with the fire door open and/
or glass broken and/or ash pan removed and/or
pellet tank open.
Any other use of the appliance other than that
planned must be authorised in advance in writing
by the manufacturer.
Furthermore, the manufacturer cannot be held in
any way liable for errors in installation, adjustment
or maintenance of the product.
1.4
IMPORTANCE OF THE MANUAL
This manual has the purpose of providing essential
rules for correct installation, use and maintenance
of the product.
PRESERVATION: Keep the manual in a place that is
easy and quick to find;
DETERIORATION OR LOSS: Consult the official site
to download the manual;
PRODUCT TRANSFER: In the event of sale between
private individuals of the product, the owner is
obliged to deliver the product with the following
manual.
1.5 GENERAL SAFETY WARNINGS
Non-compliance with the provisions of this manual
can cause damage to people, animals and
property.
• Installation, testing of the system, functionality
testing and initial calibration of the product must
only be carried out by qualified and authorised
staff.
• The product must be connected to a single
chimney flue that guarantees the draught
declared by the manufacturer and which
complies with the installation standards outlined in
the assembly location of the product.
• The premises where the product is installed must
be adequately ventilated (air intake).
• Do not touch the hot surfaces without adequate
protective equipment, to avoid burns.
• When in operation, the external surfaces reach
