INSTRUCTION MANUAL
•
3
IMPORTANT SAFETY INSTRUCTIONS
PACKING LIST
Please follow the instructions below to ensure that your unit performs optimally:
• Read user manual and installation instructions in their entirety before installing unit.
• Ensure that (6) new, identical batteries are used when replacing batteries.
Old or mismatched batteries may damage the unit.
• Ensure that mounting surface is flat and free of dirt and debris before installing.
• Ensure that the unit is mounted at least 10" (25cm) above horizontal surfaces.
• Installation must be performed by a professional.
• Do not mount unit with reflective objects in its sensing distance.
• This unit is for indoor use only.
• This unit contains electrical devices and valves, handle with care.
• Disassemble unit with care to avoid damaging liquid feed line.
• Only clean unit with neutral detergents, and dry with a soft cloth.
• Do not clean unit with water or non-neutral detergents to avoid surface damage or
internal electrical failure. Only clean sensing area on underside of unit with a soft,
dry cloth to avoid sensing errors.
• Unit must be installed at least 14" above surfaces to avoid sensor malfunction.
• Open packaging and handle unit with care to avoid damage.
• Contact your distributor if any parts of the unit are missing or damaged before installation.
• Replacement part specifications are subject to change over time.
Contact your distributor in case of non-applicable replacement parts.
(1) Unit
(1) Installation Panel
(3) ST4x25 Screws
(3) Expansion Screws
(1) Key
(1) Installation Manual
(1) Certification
CAUTION
