INSTRUCTION MANUAL
•
4
INSTALLATION
TIP: Ensure that unit is
mounted at least 14" (35
cm) above stainless steel or
other reflective countertop
surfaces.
>10" (25 cm)
7.9" (20 cm)
1. Place mounting bracket
where the unit will be secured
to the wall. Mark the locations
of the 3 holes.
2. Drill holes into the marked
areas of the mounting surface.
After holes are drilled, insert
expansion screw heads into
the corresponding holes.
3. Place mounting plate on
the wall, corresponding with
the expansion screw heads.
Then fasten mounting plate
with screws in corresponding
locations.
4. Line up grooves in back of unit with the
mounting plate, and slide dispenser into
bracket until it locks into place.
5. Push unit downward on the mounting bracket
until the connection is secure.
