Rev2.0
12
noble-pro.com
HOW TO USE THE TREADMILL
CONNECTING THE POWER CORD
Use a Surge Suppressor
The treadmill can be damaged by sudden voltage changes in your home’s power. Voltage surges,
spikes, and noise interference can result from weather conditions or from other appliances being
turned on or off. To decrease the risk of damaging the treadmill, always use a surge suppressor
with the treadmill.
Only a surge suppressor that is UL 1449 listed as a transient voltage surge suppressor (TVSS).
The surge suppressor must have a UL suppressed voltage rating of 400 volts or less and a
minimum surge dissipation of 450 joules. The surge suppressor must also be electrically rated for
240 volts AC and 15 amps. There must be a monitoring light on the surge suppressor to indicate
whether it is functioning properly.
Failure to use a properly functioning surge suppressor could result in damage to the control
system of the treadmill and serious injury to users.
Plug in the power cord
The treadmill must be grounded. If it should
malfunction or break down, grounding provides a
path of least resistance for electric current this is to
reduce the risk of electric shock. Plug the power cord
into a surge suppressor and plug the surge
suppressor into an appropriate outlet that is properly
installed and grounded in accordance with all local
codes and ordinances. The outlet must be on a
nominal 240-volt circuit capable of carrying 15 or
more amps. To avoid overloading the circuit, do not
plug other electrical devices, except for low power
devices such as cell phone chargers, into the surge suppressor or into an outlet on the same
circuit.
IMPORTANT: The treadmill may not be compatible with AFCI-equipped outlets.
HOW TO TURN ON THE POWER
IMPORTANT: If the treadmill has been exposed to cold
temperatures, allow it to warm to room temperature before
you turn on the power. If you do not do this, you may
damage the console displays or other electrical components.
Plug in the power cord. Next, locate the power switch on the
treadmill frame near the power cord. Press the power switch
into the “on” position.
HOW TO USE THE SAFETY KEY
The safety key is a designed to bring the treadmill to a
stop. Insert the key into the console as indicated and
securely attach the clip to your clothing.
IMPORTANT: The treadmill will not function without the
safety key being placed in the console.
