Rev2.0
15
noble-pro.com
TRAINING PROGRAMS
The Noble Pro ® Elite 8.0 comes with a number of predefined training programs. The program can
be selected using the Training Program or the quick selection buttons.
1.
Selecting the pre-set program.
Press the TRAINING PROG button and use the SPEED +/- buttons to select a program. The
programs are graphically illustrated on the console next to the screen. Set the target time by
using the SPEED +/- button.
2.
Start the treadmill.
Press the START button to start the workout. A moment after you press the button, the
treadmill will automatically adjust to the first speed and incline settings of the workout. Hold
the handrails and begin walking.
If the speed or incline setting is too high or too low for your liking you can manually override
the setting by pressing the SPEED or I/- buttons.
3.
Measure your heart rate if desired. You can measure your heart rate using the handgrip heart
rate monitor. See step 3 on page 14.
4.
When you are finished exercising, remove the safety key from the console. See step 4 on
page 14.
FAN CONTROL
The Noble Pro Elite
®
E8.0 comes with a speed controlled fan. Press the FAN button repeatedly
until the desired fan speed has been reached.
STEREO CONTROL
The stereo system comes with a SOUND ON/OFF button to enable the sound. Use the 3.5
headphone jack, Bluetooth or USB stick to play our desired audio format.
BLUETOOTH (MDDS)
The Noble Pro
®
Elite E8.0 comes with smart Bluetooth functionality. The Bluetooth can be enabled
by pressing the Bluetooth button. The treadmill will become visible to surrounding devices for a
short period during which time the device and be paired.
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL
To avoid damaging the treadmill, adjust the incline to
zero before you fold the treadmill. Then, remove the key
and unplug the power cord.
CAUTION: You must be able to safely lift 45 lbs. (20 kg)
to raise, lower, or move the treadmill.
1.
Hold the end covers firmly in the location shown by
the arrow below.
CAUTION: Do not hold the frame by the plastic side
rails. Bend your legs and keep your back straight.
2.
Raise the frame until the lock latch locks in the
storage position.
