15
e.
Quick Lift (ACX 10M)
When the lever is in the down position, it facilitates quick lifting. When handle the lever in neutral position, it
facilitates slow lifting.
f.
Malfunctions
If there are any malfunctions or the truck is inoperative, please stop using it. Place the truck at a safe place
and avoid further usage.
Inform immediately the manager and, or call your service.
7. BATTERY CHARGING AND REPLACEMENT (ACX 10E)
•
Only qualified personnel are allowed to service or charge the batteries. The instructions
of this handbook and from the battery- manufacturer must be observed.
•
These batteries are maintenance free; re- filling is prohibited.
•
Recycling of batteries undergoes national regulations. Please follow these regulations.
•
By handling batteries, open fire is prohibited, gases could cause explosion!
•
In the area of battery charging neither burning materials nor burning liquids are allowed.
Smoking is prohibited and the area must be ventilated.
•
Park the truck securely before starting charging or installing/changing the batteries
•
Before finishing the maintenance work, make sure, that all cables are connected
correctly and that there are no disturbing towards other components of the truck.
•
ACX10E: 1 pc 12 v/52Ah
IT IS ONLY ALLOWED TO USE SEALED LIQUID ACID BATTERIES.
THE WEIGHT OF THE BATTERIES HAS AN INFLUENCE TO THE TRUCKS
OPERATING BEHAVIOR.
PLEASE CONSIDER THE MAXIMUM OPERATING TEMPERATURE OF THE
BATTERIES.
a.
Replacement
FOR REPLACEMENT YOU NEED TO LIFT THE
TRUCK. BLOCK THE SCISSOR MECHANISM
AGAINST LOWERING!
Park the truck securely and switch off the truck with the key
switch (Fig. 1, pos. 7) and remove the emergency plug (Fig. 1,
pos. 9). Loosen the upper cover with the 2 screws. Also
remove the backside fixing bar (also with 2 screws).
Disconnect the terminals (Fig. 12) and take the battery out.
The installation is in the reverse order of the removal. Please connect the positive terminals firstly;
otherwise the truck could be damaged.
Fig. 12: Battery replacement
Terminals
