3
1. CORRECT APPLICATION
It is only allowed to use this electric stacker according to this instruction handbook.
The in this handbook described trucks are self propelled pedestrian controlled
electric power stacker, with electrically operated lifting function. The trucks are designed
for stacking operations in dedicated racking by lifting and lowering the palletized load up
to the desired lifting height.
A wrong usage can cause human injuries or can damage equipment.
The operator/ the operating company has to ensure the correct usage and has to
ensure, that this truck is used only by staff, which is trained and authorized to use this
truck.
The truck has to be used on substantially firm, smooth, prepared, level and adequate
surfaces. The truck is intended to be used for indoor applications with ambient
temperatures b5
C and + 40
C and for light duty applications without crossing
permanent obstacles or potholes. Operating on ramps is not allowed. While operating,
the load must be placed approximately on the longitudinal centre plane of the stacker.
Lifting or transporting people is forbidden.
If travelling the load must be lowered to the
lifting point.
It is not allowed to use this truck on tail lifts or loading ramps.
The capacity is marked on the load diagram as well on the Identification plate. The
operator has to consider the warnings and safety instructions.
Operating lighting must be minimum 50 Lux.
Modification
No modifications or alterations to this truck which may affect, for example, capacity,
stability or safety requirements of the truck, shall be made without the prior written
approval of the original truck manufacturer, its authorized representative, or a successor
thereof. This includes changes affecting, for example braking, steering, visibility and the
addition of removable attachments. When the manufacturer or its successor approve a
modification or alteration, they shall also make and approve appropriate changes to
capacity plate, decals, tags and operation and maintenance handbooks.
By not observing these instructions, the warranty becomes void.
Summary of Contents for ECL 10
