61
(7) Replace main roller
(a) Dismantle the upper side main roller with drawing tools, Not to lost the adjusting pillow
(b) Install the new roller together with the djusting pillow dismantled in step(a)
(8) Sling the inner mast until all of the engaged in it.
(9) Install the lifting cylinder and fork carriage adverse to the steps as dismantled.
7.6 Instructions of installing accessaries
If user need to assemble accessaries on truck, please inform our company, do not
assemble them by yourself.
8 Disassembling and installation
8.1 Attentions
(1) Only qualified person can maintain or dismantle forklift.
(2) Before dismantling and inspecting, park truck level and wedge truck to prevent moving
suddenly, meanwhile, turn main switch off and cut battery off.
(3) Before dismantling and inspecting,remove matel ring ,watch and other metal item from
you to prevent suddenness short circuit.
(4) During disassembling, please use normal tools, use special appointed tools when
requested.
(5) Choose optimum elevating equipment to hoist parts dismantled to prevent danger.
(6) Check slings for safety. Keep slings tension during lifting.
(7) Be careful to prevent falldown of heavy parts attributing to unbalance
during disassembling operating.
8.2 Hoisting location for parts disassembled
(1) Hoisting directions for lifting system see figure 2-75
(2) Roof guard hoisting directions see figure 2-76
(3) Hoisting directions for Counterweight see figure 2-77
The hoisting ring on counterweight can only be used to
hoist counterweightnot to hoist entire vehicle.
Type
outline dimension
length×width×height
（
mm
）
Weight
（
kg
）
FE4D40
1068
×
112
×
440
234
1138
×
329
×
1215
450
Type
outline dimension
length×width×height
（
mm
）
Weight
（
kg
）
FE4P16-18N
2200
×
1380
×
585
1200
Type
outline dimension
length×width×height
（
mm
）
Weight
（
kg
）
FE4P16-18N
1398
×
1048
×
1375
85
figure
2-75
figure
2-76
