20
8. BATTERY CHARGING AND REPLACEMENT
•
Only qualified personnel are allowed to service or charge the batteries. The
instructions of this handbook must be observed.
•
PS E12BSL is lead acid battery, PS E12NSL is lithium battery
•
Recycling of batteries undergoes national regulations. Please follow these
regulations.
•
By handling batteries, open fire is prohibited!
•
In the area of battery charging neither burning materials nor burning liquids are
allowed. Smoking is prohibited and the area must be ventilated.
•
Park the truck securely before starting charging or installing/changing the batteries
•
Before finishing the maintenance work, make sure, that all cables are connected
correctly and that there are no disturbing towards other components of the truck.
PS E12BSL is equipped with the following lead-acid battery:
2x12V / 85Ah, 2x27kg; option: 2x12V / 106Ah
，
2x34kg
PS E12NSL is equipped with the following lithium battery:
24V / 60Ah, 19kg
IT IS ONLY ALLOWED TO USE LEAD ACID BATTERY FOR PS E12BSL. IT IS ONLY
ALLOWED TO USE LITHIUM BATTERY FOR PS E12NSL.
PLEASE CONSIDER THE MAXIMUM OPERATING TEMPERATURE OF THE
BATTERIES.
a. Replacement
Park the truck securely and press emergency
switch (22). Remove four screws firstly, take out the
main cover. Secondly, remove the screw on
negative pole of the battery and then remove the
screw on positive pole. Thirdly, unloosen and
remove the battery fixing frame.
For PS E12BSL, remove the second battery on
bottom following the same way of disassembly of
the first battery.
The installation is in the reverse order.
Fig. 15: Battery replacement
