14
6.
OPERATION INSTRUCTIONS
BEFORE OPERATING THIS TRUCK, PLEASE FOLLOW THE WARNINGS AND
SAFETY INSTRUCTIONS (CHAPTER 3).
Make sure, that the load is palletized and stable and that the daily inspection is carried out.
PSE12BD
Pull out the emergency button (Fig.1, 20), type the password on pin-code panel and press
√
button to
start the truck.
Press the horn button (Fig.7, 27) to activate the audible warning signal.
PSE12ND
Pull out the emergency button (Fig.1, 20), Press the button switch, and a green light will appear on the
switch (Fig.8), type the password on pin-code panel and press
√
button to start the truck. Truck can
also be activated with RFID access card.
Press the horn button (Fig.7, 27) to activate the audible warning signal.
a. Parking
DO NOT PARK THE TRUCK ON
INCLINED SURFACES
The truck is equipped with an electromagnetic
failsafe stopping and parking brake.
PSE12BD: Always lower the forks fully. Press the
emergency switch (20).
PSE12ND: Always lower the forks fully. Press the
button, green LED ring is off (Fig.8), and press
the emergency switch (20).
Fig.7: Tiller operating controls
Fig. 9: Residual lift diagram
Fig.8: Button switch
