17
f. Steering
Y
ou steer the truck by moving the tiller to the left or right side. When travel in front direction (opposite to
direction of forks) the turning of tiller bar to right side will cause the truck turning clockwise.
g. Braking
P
LEASE CHECK THE BRAKING DISTANCE WITH TRUCK BEFORE OPERATION
THE BRAKING PERFORMANCE DEPENDS ON THE TRACK CONDITIONS AND
THE LOAD CONDITIONS OF THE TRUCK
The braking function can be activated on several ways:
•
By moving the accelerator button (26) back to the initial ‘0’ position or by releasing the button, the
regenerative braking is activated. The truck brakes until it stops.
•
By moving the accelerator button (26) from one driving direction directly to the opposite direction,
the truck brakes regenerative until it starts traveling into the opposite direction.
•
The truck brakes, if the tiller is moved up or down to the braking zones (‘B’). If the tiller is released,
the tiller moves automatically up to the upper baking zone (‘B’).The truck brakes until it stops.
•
The safety (belly) button (16) prevents the operator from being crushed. If this button is activated,
the truck decelerates and/ or starts traveling into the backwards direction (‘Bw.’) for a short distance
and stops. Please consider, that this button also operates, if the truckis not traveling and the tiller is
in the operating zone.
h. Malfunctions
I
f there are any malfunctions or the truck is inoperative, please stop using the truck and activate the
emergency button (20) by pushing it. If possible, park the truck on a safe area and press the X button of
pin-code panel. Inform immediately the manager and, or call your service. If necessary, move the truck
out of the operating area by using dedicated lifting equipment. Do not tow the truck.
i. Emergency
In emergencies or in the event of tip over (or off dock), keep safe distance immediately. If possible push
the emergency button (20). All electrical functions will be stopped.
