Noblelift PT 20I, Instruction Handbook Manual

10 

•

  Use the truck to load unstable, unbalanced goods. 

•

  Use truck without manufacturer

’

s written consent. 

•

  Lifted loads could become unstable at wind forces. In the case of wind forces, please 

do not lift the load. 

•

  When truck is used only as stacker, driving is prohibited when lifting height with load 

is higher than 500mm. 

•

  When truck is used as pallet truck and stacker at the same time, load on the bottom 

fork must be heavier than the top fork. 

Watch difference in floor levels when driving. Load could fall down or the truck could get uncontrollable.   

Keep watching the condition of load. Stop operating the truck if load becomes unstable.

Stop the truck by brake and activate the emergency button (5) by pushing when load sliding on or off the 

truck. If the truck has any malfunctions, follow chapter 6.   

Practice maintenance work according to regular inspection. This truck is non watertight, please use the 

truck  in  dry condition. Prolonged continuous operation might cause damage of the power pack. Stop 

operation if temperature of hydraulic oil is too high.   

•

  When operating the electric pallet truck, the operator has to wear safety shoes. 

•

  The truck is intended to be used for indoor applications with ambient temperatures 

b5

°

C and +40

°

C.   

•

  The operating lighting must be minimum 50 Lux. 

•

  It is not allowed to use the truck on ramps.

•

  To prevent unintended sudden movements without  operating the tuck (i.e. from 

another person, etc.) switch off the truck when not operating it. 

4.  COMMISSIONING, TRANSPORTING, DECOMMISSIONING 

a. 

  Commissioning 

Table 2:

 Commissioning data 

After receiving our new pallet truck or for re-commissioning you have to do following before (firstly) 

operating the truck: 

•

Check if are all parts included and not damaged 

•

Eventually installation of the multifunction tiller 

•

Eventually installation and charging the batteries (follow chapter 7) 

•

Do the work according to the daily inspections as well as functional checks. 

Type 

PT 20I 

PT20D 

PT20H 

Commissioning weight [kg] 

855 kg 

990 kg 

1010 kg 

1060 kg 

Dimensions [mm] 

1934X729X895 

1940X729X1178  1940X729X1378  1955X729X1233