21
9. TROUBLE SHOOTING
•
If the truck has malfunctions follow the instructions, mentioned in chapter 6.
Table 5
TROUBLE
: Trouble shooting
CAUSE
REPAIR
Load can’t be lifted
Load is too heavy
Lift only the max. capacity
mentioned on the ID-plate
Battery discharged
Charge the battery
Lifting fuse faulty
Check and replace the lifting
fuse
Hydraulic oil level is too low
Check and refill hydraulic oil
Oil leakage
Check and repair the hoses
and/or the sealing of the
cylinder
Oil leakage from
air breathing
Excessive quantity of oil.
Reduce oil quantity.
Truck not starts
operating
Battery in charging
Charge the battery completely
and remove the main power
plug form the electrical socket
Battery is not connected
Connect the battery correctly
Fuse faulty
Check and replace fuses
Low
power of battery
Charge the battery
Combined emergency button is
activated
De-activate the combined
emergency button by insert the
key and pull out the knob.
Tiller in the operating zone
Move the tiller firstly to the
braking zone.
If the truck has malfunctions and can’t be operated out of the working zone, jack the truck up and go with
a load handler under the truck to ensure the truck securely. Then move truck out of the aisle.
Summary of Contents for PT 20I
Page 2: ...1...
Page 4: ...3...
Page 28: ...27 Sign not under on forks O Sign Caution charger H Warning sticker R Warning sticker Q...