9
The truck has a key switch (6) which stops all lifting-, lowering-, driving- functions and engages the
failsafe electromagnetic brake when it is pushed. The truck is equipped with a safety (belly) button (1)
which switches the driving direction away from the operator, if the truck travels towards the operator and
the tiller is activated in the tillers operating zone. Follow also the instructions given on the decals.
Replace the decals if they are damaged or missing.
d.
Identification plate
1
Designation, type
2
Serial number
3
Rated capacity in kg
4
Supply voltage in V
5
Own mass (self weight) in kg without battery
6
Name and address of manufacturer)
7 Battery weight minimum/ maximum
8 Nominal power in kW
9 Load center distance
10 Manufacturing data
11 Option
3. WARNINGS, RESIDUAL RISK AND SAFETY INSTRUCTIONS
•
Put foot or hand under or into the lifting mechanism.
DO NOT
•
Allow other person than the operator to stand in front of or behind the truck when it is
moving or lifting/lowering.
•
Overload the truck.
•
Put foot in front of the wheels, could result in injury.
•
Lift people. People could fall down and suffer severe injury.
•
Push or pull loads.
•
Use this truck on ramps.
•
Side or end load. Load must be distributed evenly on the forks.
1
2
4
5
3
7
If sold to the EU, here the
place of the CE marking
6
8
9
10
11
Fig. 4: Identification plate
Summary of Contents for PT 20I
Page 2: ...1...
Page 4: ...3...
Page 28: ...27 Sign not under on forks O Sign Caution charger H Warning sticker R Warning sticker Q...
