10
Use truck without manufacturer
’
s written consent.
Supply on board charger with AC voltage other than 110V or 220V.
Watch difference in floor levels when driving. Load could fall down or the truck could get
uncontrollable.
Keep watching the condition of load. Stop operating the truck if load becomes unstable.
Brake the truck and activate the emergency switch (3) by pushing when sliding load on
or off the truck. If the truck has any malfunctions, follow chapter 8.
Practice maintenance work according to regular inspection. This truck is not designed to
be water resistant. Use the truck under dry condition. Prolonged continuous operation
might cause damage of the power pack. Stop operation if temperature of hydraulic oil is
too high.
When operating the electric pallet truck, the operator has to wear safety shoes.
The truck is intended to be used for indoor applications with ambient temperatures
b5
C and + 40
C.
The operating lighting must be minimum 50 Lux.
It is not allowed to use the truck on ramps.
To prevent unintended sudden movements when not operating the tuck (i.e. from
another person, etc.) switch of f the truck when not operating it.
4. COMMISSIONING, TRANSPORTING, DECOMMISSIONING
a.
Commissioning
Table 2: Commissioning data
Type
PT E30
Commissioning
weight [lbs]
app.375lbs
Dimensions [in]
69x27.6x35.4
After receiving our new pallet truck or for re-commissioning you have to do following
before (firstly) operating the truck:
Check if are all parts included and not damaged
Eventually installation and charging the batteries (follow chapter 7)
Do the work according to the daily inspections as well as functional checks.
b.
Lifting/ transportation
For transporting, remove the load, lower the forks to the lowest position and fix the
truck safe with dedicated lifting gear
according to the following figures.
