15
In the area of battery charging neither burning materials nor burning liquids are
allowed. Smoking is prohibited and the area must be ventilated.
Park the truck securely before starting charging or installing/changing the batteries
Before finishing the maintenance work, make sure, that all cables are connected
correctly and that there are no disturbing towards other components of the truck.
As standard batteries, the truck is equipped with following sealed liquid acid battery-
types:
2 pc 12V/ 45Ah
IT IS ONLY ALLOWED TO USE SEALED LIQUID ACID BATTERIES.
THE WEIGHT OF THE BATTERIES HAS AN INFLUENCE TO THE TRUCKS
OPERATING BEHAVIOR.
PLEASE CONSIDER THE MAXIMUM OPERATING TEMPERATURE OF THE
BATTERIES.
a.
Replacement
Park the truck securely , turn off zhe key switch and
remove the battery plug (11).
Lift the battery unit(17), take out and place aside.
Place the new batteries with the terminal- positions
according to fig. 10. The installation is in the reverse
order of the removal.
b. Battery indicator
The discharge status is indicated by three-color (red yellow green) power indicating device
When the battery is properly charged, the most right green LED lit. As the battery’s
state-of-charge decreases, successive LEDs light up, only one on at a time.
Green LED lights up, indicating
80%
—
100%
energy reserve
Yellow LED lights up, indicating
30%
—
80%
energy reserve
Red LED lights up, indicating
30%
—
10%
energy reserve
Fig.10:Replace the battery
Fig.11: Battery discharge indicator
