background image

 
 

4

1. CORRECT APPLICATION 

 
It is only allowed to use this electric pallet truck according to this instruction handbook.   
 
The in this handbook described trucks are self propelled electric power pallet trucks, 
with electrically or manually operated low height lifting function. The trucks are designed 
to lift, lower and transport palletized loads. 
 
A wrong usage can cause human injuries or can damage equipment.         
The operator/ the operating company has to ensure the correct usage and has to 
ensure, that this pallet truck is used only by staff, which is trained and authorized to use 
this truck. 
 
The pallet truck has to be used on substantially firm, smooth, prepared, level and 
adequate surfaces. The truck is intended to be used for indoor applications with ambient 
temperatures b5

C and + 40

C and for light duty applications without crossing 

permanent obstacles or potholes. Operating on ramps is not allowed. While operating, 
the load must be placed approximately on the longitudinal centre plane of the truck.   
Lifting or transporting people is forbidden. 
 
If used on tail lifts or loading ramps, please ensure that these are used correctly 
according to the operating instructions. 
 
The capacity is marked on capacity sticker as well on the Identification plate. The 
operator has to consider the warnings and safety instructions. 
Operating lighting must be minimum 50 Lux. 
   
Modification 
No modifications or alterations to this pallet truck which may affect, for example, 
capacity, stability or safety requirements of the truck, shall be made without the prior 
written approval of the original truck manufacturer, its authorized representative, or a 
successor thereof. This includes changes affecting, for example braking, steering, 
visibility and the addition of removable attachments. When the manufacturer or its 
successor approve a modification or alteration, they shall also make and approve 
appropriate changes to capacity plate, decals, tags and operation and maintenance 
handbooks. 
 
By not observing these instructions, the warranty becomes void. 

Summary of Contents for PT E30

























Reviews: