15
Table 3:
Battery specification
Model
Battery specification
PTE15Q
24V20Ah lithium battery, 6.5kg
IT IS ONLY ALLOWED TO USE LITHIUM BATTERIES.
PLEASE CONSIDER THE MAXIMUM OPERATING TEMPERATURE OF THE
BATTERIES AND REFER TO SAFETY INSTRUCTIONS BELOW.
a.
Safety Instructions
Failure to follow the below requirements may cause damage to your property, cause injuries or death.
Measures to prevent ignition
It is forbidden to work at temperatures over 60
℃
.
It is forbidden to place it beside heat sources, such as stoves, fireplaces, etc.
Direct sunlight must be avoided.
It is forbidden to place batteries near inflammable and explosive substances.
Measures to prevent explosion
Do not hit the battery, no impacts are allowed.
Exclude penetration of objects through battery case or damages to battery case
DO not throw products into the fire or water.
Measures to prevent electric leakage
Do not disassemble.
Do not contact by wet hands.
Do not expose it to moisture or liquids.
Do not place batteries in a place of easy access by children or animals.
Measures to preventing damage to battery systems
It is forbidden to contact liquids or corrosive chemicals.
Do not expose batteries to high temperature and/or high pressure.
No trampling, disassembly or smashing.
Do not attempt charging from discharge terminals and discharging from charging terminals.
Installation environment
In order to ensure the best operating performance, the battery need to be kept under normal working
conditions: between 0 and 40 degrees Celsius and normal humidity. Avoid excessive temperature
difference on both sides of the battery (more than 5
℃
)
Emergency management
Below are examples of several ways to deal with possible emergencies:
In case of Smoke or Ignition: stop to use equipment immediately, take appropriate actions
according to working instructions and stay away from the scene.
In case battery is immersed in water: stop to use equipment immediately, take appropriate
actions according to working instructions and stay away from the scene.
