15
Speed Scrub 350 9016424 (09-2017)
OPERATION
HOW THE MACHINE WORKS
Conventional scrubbing:
When using the conventional scrubbing mode,
water and detergent mixture from the solution tank
fl
ows to the
fl
oor and the rotating brush(es)/pad(s)
scrub the
fl
oor clean. As the machine moves
forward, the squeegee with vacuum suction picks
up the dirty solution from the
fl
oor into the recovery
tank.
ec-H2O NanoClean Technology (option):
When using the ec-H2O NanoClean technology,
normal water passes through a module where it
is electrically converted into a cleaning solution.
The electrically converted water attacks the dirt,
allowing the machine to easily scrub away the
suspended soil. The converted water then returns
to normal water in the recovery tank.
BRUSH AND PAD INFORMATION
For best results, use the appropriate brush or
pad for the cleaning application. Listed below are
brushes and pads and the applications for which
each is best suited.
NOTE: The amount and type of soilage play an
important role in determining the type of brush or
pad to use. Contact a Tennant representative for
specifi c recommendations.
Soft nylon bristle scrub brush (White) -
Recommended for cleaning coated
fl
oors without
removing
fi
nish. Cleans without scuf
fi
ng.
Polypropylene bristle scrub brush (Black) -
This
general purpose polypropylene bristle scrub brush
is used for scrubbing lightly compacted soilage.
This brush works well for maintaining concrete,
wood and grouted tile
fl
oors.
Super abrasive bristle scrub brush (Gray) -
Nylon
fi
ber impregnated with abrasive grit to
remove stains and soilage. Strong action on any
surface. Performs well on buildup, grease, or tire
marks.
Polishing pad (White)
- For maintaining highly
polished or burnished
fl
oors.
Buf
fi
ng pad (Red)
- For light duty scrubbing
without removing
fl
oor
fi
nish.
Scrubbing pad (Blue)
−
For medium to heavy
duty scrubbing. Removes dirt, spills, and scuffs.
Stripping pad (Brown)
- For stripping of
fl
oor
fi
nish to prepare the
fl
oor for recoating.
Polypropylene Side Brush
−
For general
sweeping of light to medium debris.
Heavy duty stripping pad (Black) -
Used for
aggressive stripping of heavy
fi
nishes/sealers, or
very heavy duty scrubbing.
Surface preparation pad (Maroon) -
Used for
very aggressive chemical free removal of
fl
oor
fi
nish to prepare the
fl
oor for re-coating.
Tufted pad driver
- Standard pad driver has short
bristles, or “tufts,” on the back to hold the pad in
place. This driver works with all Tennant pads
except the black high productivity pad.
