50
Speed Scrub 350 9016424 (09-2017)
MAINTENANCE
SQUEEGEE BLADE REPLACEMENT
Each squeegee blade has four wiping edges.
When the blades become worn, simply rotate the
blades end-for-end or top-to-bottom for a new
wiping edge. Replace blade if all four edges are
worn.
REPLACING SQUEEGEES ON MACHINES
WITH 20 IN. (500 MM) SCRUB HEADS
1. Stop the machine and lower the scrub head.
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, and remove key.
2. Rotate the squeegee assembly to the right
side of the machine.
3. Disconnect the vacuum hose from the
squeegee assembly.
4. Squeeze the squeegee retainer lever and
remove the squeegee assembly from the
machine.
5. Fully loosen the four knobs on squeegee
assembly. This will separate the spring loaded
blade retainer from squeegee frame.
6. Remove worn blade(s) from the blade retainer.
