56
Speed Scrub 350 9016424 (09-2017)
MAINTENANCE
JACKING UP THE FRONT OF THE MACHINE
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, and remove key.
1. Position the steering wheel so the front
steering wheel is oriented straight out to the
front of the machine.
2. Block the rear wheel.
3. Position
a
fl
oor jack under the center jack point
located at the front of the machine.
4. Use
fl
oor jack to raise machine from the
fl
oor.
5. Place a jack stand underneath the other jack
point and lower the machine onto the jack
stand so both the jack stand and
fl
oor jack are
supporting the weight of the machine.
6. When
fi
nished with maintenance, use
fl
oor jack
to raise machine from jack stand, remove the
jack stand from under the machine, and lower
the machine to the
fl
oor.
JACKING UP THE REAR OF THE MACHINE
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, and remove key.
1. Block both front drive wheels.
2. Rotate the squeegee assembly to the right
side of the machine.
3. Remove the lower shroud from the machine.
4. Position
a
fl
oor jack under the tie down / jack
point and arrange all hoses / cables so they
are not crushed when the machine is jacked
up off the
fl
oor.
5. Use
a
fl
oor jack to raise machine from the
fl
oor.
