4.3 The Truck Operation
4.3.1 Operation of Starting up, Driving and Parking
Enough caution must be attached for starting up and driving of the truck, especially when the
person body reaching out of the truck. Make sure that during driving, it is prohibited to carry any
person.
Emergency parking
When parking urgently, press power switch and then all electric control functions are cut off and let
the handle-bar be vertical.
Forced braking
If you are forced to stop, release the handle-bar, let it be vertical, and then the truck is automatically
braked (emergency stop).
Starting up
The driving speed is controlled by the controller.
Pull down the handle-bar to a befitting position.
Adjust the handle-bar to the direction required and the truck is moving towards the selected
direction.
Driving
Swing
the
FWD-BWD Tuning Knob
leftwards or rightwards to drive.
Driving on a Slope
The cargo carried must face to upward direction of the slope. Make sure to take safety
measures to the downward slip direction of the truck: When the
FWD-BWD Tuning Knob
at “0”
position, please pull the handle backwards immediately and release it according to actual
requirement to enable the electromagnetic brake to work automatically and control the speed and
the direction of the truck (for downward slip).
Braking
The operator must fully understand the braking performance is subject to the road conditions.
But there are three braking types for the truck:
Electromagnetic braking (handle-bar)
Reverse current braking (controller)
Sensor braking (release braking)
Electromagnetic braking
In emergency situations, the truck must be stopped by electromagnetic braking (handle-bar be
vertical) only.
11
