DMX Controls are not
DMX source signals are
Cables must be fully
functioning
not being conducted.
connected into ports.
Cables must conduct signals
and be free of damaged to
wires or terminals.
Verify correct signal levels are
originating from DMX source
and are being conducted
through the cables.
Incorrect fixture address.
Verify the fixture is correctly
addressed.
Verify the DMX source is
correctly addressing the
fixture.
Output is Dim
Obstructions in front of
Remove obstructions; clean
fixture; window has
window of any dirt, dust
contamination.
or residue buildup.
TIMER display shows
Replace lamp if it has
lamp has exceeded rated
passed the maximum
life.
rated life (1,000 hours).
Lamp failure.
Replace lamp if any abnor-
malities or damage to the
envelope or contacts are
present.
Socket failure.
Remove any contamination or
replace if damage is found.
18
