avoid the possibility of water spillage.
Active Charcoal Filter (Optional)
Replace the active charcoal
fi
lter with new one once
a year. It can be purchased from your dealer or from
the Spare Parts Department.
• Turn the
fi
lter 90°clockwise or anti-clockwise.
And then remove the
fi
lter.
• Insert the new
fi
lter with the handle in the
vertical position.
• Turn the
fi
lter 90° clockwise or anti-clockwise
until they click into position.
Power Failure
• Most power failures are corrected within a few
hours and should not affect the temperature of
your appliance if you minimize the number of
times the door is opened. If the power is going to
be off for a longer period of time, you need to
take the proper steps to protect your contents.
Vacation Time
• Short holidays: Leave the Wine Cooler in
operation for holidays of less than three weeks.
• Long absences: If the appliance will not be
used for several months, remove all items, turn
off the appliance and unplug. Clean and dry the
interior thoroughly. To prevent odour and mold
growth, leave the door open slightly: blocking it
open if necessary.
Moving Your Wine Cooler
• Remove all items.
• Securely tape down all loose items (shelves)
inside your appliance.
• Turn the adjustable leg up to the base to avoid
damage.
• Tape the door shut.
• Be sure the appliance stays secure in the upright
position during transportation. Also protect
outside of appliance with a blanket, or similar
item.
Energy Saving Tips
• The Wine Cooler should be located in the
coolest area of the room, away from heat
producing appliances, and out of the direct
sunlight.
• Ensure that the unit is adequately ventilated.
Never cover air vents.
• Only open the door for as long as necessary.
Cleaning Your Wine Cooler
• Turn off the power, unplug the appliance, and
remove all items including shelves and rack.
• Wash the inside surfaces with a warm water and
baking soda solution. The solution should be
about 2 tablespoons of baking soda to a pint of
water.
• Wash the shelves with a mild detergent solution.
• Wring excess water out of the sponge or cloth
when cleaning any area of the controls.
• Wash the outside cabinet with warm water and
mild liquid detergent. Rinse well and wipe dry
with a clean soft cloth.
