background image

Introduction .......................................................................................... 1

Index ................................................................................................... 2

Introducing the RoyalFlow....................................................................... 2

Environmental Conservation .................................................................... 3

Safety .................................................................................................. 4

Safety Adhesive Labels ........................................................................... 8

Assembly ............................................................................................10

Application ..........................................................................................11

Mixers .................................................................................................11

Coupling to the Tractor ..........................................................................12

Preparing and Installing the Driveshaft ....................................................13

Spreading Rate ....................................................................................14

Spreading in Two Rows ..........................................................................16

Maintenance ........................................................................................18

Technical Characteristics ........................................................................20

Guarantee Certifi cate ............................................................................22

Not supplied with the machine.

INTRODUCING THE ROYALFLOW

STANDARD MIXER

DOSING BAR

DRIVESHAFT

VALVE  

LEVER

     *EXTRA MIXER 

INDEX

     RESERVOIR

PENDULUM

2                                    RoyalFlow-600

Summary of Contents for RoyalFlow-600


























Reviews: