3
Installation
Mounting
Select the installation place so that air can flow freely on all sides of the transmitter and that it represents
the air that is to be measured. Avoid heat sources and direct sunlight. Place the device to the measuring
location with one of the following ways:
•
Mount the wall holder with two universal countersunk screws (ST 2.5 or ST 3.0). Use applicable
length depending wall material. In correct orientation, the wall holder has its hooks pointing
upwards. Attach the Kombi-LoRaWAN to the holder.
•
Place the Kombi-LoRaWAN on any surface with the bottom facing down.
