P
ersonalise your device
83
If you want the caller’s name to be spoken when your
device rings, select
Options
>
Personalise
, and set
Say
caller's name
to
On
. The caller’s name must be saved in
Contacts
.
To create a new profile, select
Options
>
Create new
.
Offline profile
The
Offline
profile lets you use the device without
connecting to the wireless network. When you activate the
Offline
profile, the connection to the wireless network is
turned off, as indicated by
in the signal strength
indicator area. All wireless RF signals to and from the
device are prevented. If you try to send messages, they are
placed in the outbox to be sent later.
When the
Offline
profile is active, you can use your device
without a (U)SIM card.
Important:
In the offline profile you cannot make or
receive any calls, or use other features that require cellular
network coverage. Calls may still be possible to the official
emergency number programmed into your device. To make
calls, you must first activate the phone function by
changing profiles. If the device has been locked, enter the
lock code.
When you have activated the
Offline
profile, you can still
use the wireless LAN, for example, to read your e-mail or
browse on the internet. Remember to comply with any
applicable safety requirements when establishing and
using a wireless LAN connection. See ‘Wireless LAN’, p. 26.
You can also use Bluetooth connectivity while in the
Offline
profile. See ‘Bluetooth connectivity’, p. 28.
To leave the
Offline
profile, press the power key, and select
another profile. The device re-enables wireless
transmissions (providing there is sufficient signal
strength).
3-D tones
Press ,
and
select
Tools
>
3-D tones
. With
3-D tones
you can enable three-dimensional sound effects for
ringing tones. Not all ringing tones support 3-D effects.
To enable the 3-D effects, select
3-D ringing tone
effects
>
On
. To change the ringing tone, select
Ringing
tone
and the desired ringing tone.
To change the 3–D effect that is applied to the ringing
tone, select
Sound trajectory
and the desired effect. To
modify the effect, select from the following settings:
Trajectory speed
—Scroll left or right to adjust the speed at
which sound moves from one direction to another. This
setting is not available for all ringing tones.
Reverberation
—Select the type of echo.
Summary of Contents for 002D2Q8
Page 1: ...Nokia N95 1 ...
