To create a new access point, select
Access point
.
The device asks to check for available connections.
After the search, connections that are already available
are displayed and can be shared by a new access point.
If you skip this step, you are asked to select a
connection method and to define the settings needed.
To edit the settings of an access point, select one of the
access point groups, scroll to an access point, and select
Edit
. Use the instructions provided by your service
provider to edit the following:
•
Connection name
— Enter a name for the
connection.
•
Data bearer
— Select the data connection type.
Depending on the data connection you select, only
certain setting fields are available. Fill in all fields
marked with
Must be defined
or with a red
*
. Other
fields can be left empty, unless your service provider
has instructed otherwise.
To use a data connection, your service provider must
support this feature, and if necessary, activate it for
your SIM card.
Create access point groups
Select
Menu
>
Control panel
>
Settings
and
Connection
>
Destinations
.
Some applications allow you to use access point groups
to connect to a network.
To avoid selecting which access point to use every time
the device attempts to connect to a network, you can
create a group that contains various access points, and
define the order in which the access points are used to
connect to a network.
For example, you can add wireless LAN (WLAN) and
packet data access points to an internet access point
group and use the group for browsing the web. If you
give the WLAN access point the higher priority, the
device connects to the internet through a WLAN if
available and through a packet data connection if not.
To create a new access point group, select
Options
>
Manage
>
New destination
.
To add access points to an access point group, select
the group and
Options
>
New access point
. To copy
an existing access point from another group, select the
group, scroll to an existing access point, and select
Options
>
Organise
>
Copy to other dest.
.
To change the priority order of access points within a
group, scroll to an access point and
Options
>
Organise
>
Change priority
.
Packet data access points
Select
Menu
>
Control panel
>
Settings
and
Connection
>
Destinations
>
Access point
, and
follow the instructions on the display. Or, open one of
the access point groups, select an access point marked
with
, and select
Edit
.
Use the instructions provided by your service provider
to edit the following:
•
Access point name
— The access point name is
provided by your service provider.
155
Se
ttings
© 2009 Nokia. All rights reserved.
Summary of Contents for 002J3X4
Page 1: ......
