background image

B a s i c   u s e

14

Carry the headset in the strap

The headset may be provided with a carrying strap. You 
can use the strap to wear the headset around your neck. 

To attach the headset to the strap, insert the headset into 
the catch at the end of the strap.

To detach the headset, pull it from the catch.

Calls

To make a call, use your mobile device in the normal way 
when the headset is connected to the device. The blue 
indicator light flashes during the call.

To redial the number you last called (if your mobile device supports this 
feature with the headset), press the multifunction key twice.

To activate voice dialling (if your mobile device supports this feature with 
the headset), when no call is in progress, press and hold the multifunction 
key for about 2 to 3 seconds until the mobile device starts voice dialling, 
and proceed as described in the user guide of the device.

When you receive a call, the indicator light flashes blue quickly, and you 
hear a ringing tone through the headset. To answer the call, press the 
multifunction key, or use the keys of the mobile device. To reject the call, 
press the multifunction key twice, or use the keys of the mobile device.

To end a call, press the multifunction key, or use the keys of the mobile 
device.

Summary of Contents for 02705Q5





















Reviews: