background image

G e t   s t a r t e d

8

Warning:

 Use only chargers approved by Nokia for use with this 

particular enhancement. The use of any other types may invalidate any 
approval or warranty, and may be dangerous.

When you disconnect the power cord of any enhancement, grasp and pull the plug, 
not the cord.

Charge the battery

Before charging the battery, carefully read “Battery information,” p. 17.

1. Connect the charger to a wall outlet.

2. Connect the charger cable to the charger 

connector. The indicator light is red while 
charging. Charging the battery fully may 
take up to 1 hour with the AC-6 or DC-6 
charger.

3. When the battery is fully charged, the 

indicator light turns green. Disconnect the charger from the headset 
and the wall outlet.

You can also charge the battery through the USB port of a compatible PC 
using the Nokia Connectivity Cable CA-101 (sold separately). Connect one 
end of the cable to the charger connector and the other end to the USB 
port on the PC.

The fully charged battery has power for up to 6 hours of talk time or up to 
160 hours of standby time.

When battery power is low, the headset beeps at regular intervals, and the 
indicator light slowly flashes red.

Summary of Contents for 02705Q5





















Reviews: