background image

12

Copyright © 2009 Nokia. All rights reserved.

Care and maintenance

Your device is a product of superior 
design and craftsmanship and should 
be treated with care. The following 
suggestions will help you protect your 
warranty coverage.

• Keep the device dry. Precipitation, 

humidity, and all types of liquids or 
moisture can contain minerals that 
will corrode electronic circuits. If 
your device does get wet, allow it to 
dry completely.

• Do not use or store the device in 

dusty, dirty areas. Its moving parts 
and electronic components can be 
damaged.

• Do not store the device in hot areas. 

High temperatures can shorten the 
life of electronic devices, damage 
batteries, and warp or melt certain 
plastics.

• Do not store the device in cold 

areas. When the device returns to 

its normal temperature, moisture 
can form inside the device and 
damage electronic circuit boards.

• Do not attempt to open the device.

• Do not drop, knock, or shake the 

device. Rough handling can break 
internal circuit boards and fine 
mechanics.

• Do not use harsh chemicals, 

cleaning solvents, or strong 
detergents to clean the device.

• Do not paint the device. Paint can 

clog the moving parts and prevent 
proper operation.

These suggestions apply equally to 
your device, charger, or any accessory. 
If any device is not working properly, 
take it to the nearest authorised 
service facility for service.

Summary of Contents for 02719B5













Reviews: